Why DATA sound is heard at the beginning of digital communications on Uniden Bearcat Trunktracker IV?
If you hear a DATA sound at the beginning of digital communications on your Uniden Scanner, it could be because APCO project 25 systems can send data before voice communication, or the data sound can be heard when signal strength is weak.
Why Uniden Bearcat Trunktracker IV won't stop during Scan List mode?
If your Uniden Scanner won't stop during Scan List mode, it could be because no IDs have been programmed or the IDs you have stored are not active.
Why Channel Activity Indicators are flashing but no sound is heard on Uniden Bearcat Trunktracker IV?
If Channel Activity Indicators are flashing but no sound is heard on your Uniden Scanner, it may be a telephone interconnect call, which are intentionally blocked by your scanner. Also, the ID on your display may not be active.
What does 'APCO P25 CARD NOT INSTALLED' mean on Uniden Bearcat Trunktracker IV Scanner?
If the message 'APCO P25 CARD NOT INSTALLED' appears when the Uniden scanner is turned ON, check to see if the P-25 Card is properly installed.
General| Trunking Capability | Yes |
|---|---|
| Scan Rate | 100 channels per second |
| Priority Channels | Yes |
| GPS Compatibility | Yes |
| Memory Backup | Yes |
| Type | Handheld Scanner |
| Display | LCD |
| Power Source | AC adapter |
| Bands | VHF, UHF |
| Frequency Steps | 5, 6.25, 10, 12.5 kHz |
| Modes | AM, FM |
Legal considerations for operating a scanning receiver.
Guidance on how to effectively use the owner's manual.
Background on conventional and trunked scanning.
Explanation of simplex and repeater operation in conventional systems.
How trunking systems manage frequencies efficiently.
Details on Motorola trunking system types (Type I, II, IIi, Astro).
Explanation of EDACS trunking, LCN, and AFS hierarchy.
Information on Logic Trunked Radio (LTR) systems.
How the scanner's memory is organized into banks and channels.
Contacting Uniden and other sources for frequency data.
Identification of controls, connectors, and display icons.
List of items included with the BC796D scanner.
Guide to connecting and mounting antennas.
Methods for mounting and connecting power for vehicle/desktop.
Connecting external speakers or earphones for listening.
Guidelines for safe listening with earphones to prevent hearing damage.
Instructions for connecting clone and tape recorder cables.
Steps to power on the scanner and adjust the squelch control.
Navigating the scanner's menu for various settings.
Manually selecting channels and locking/unlocking banks/channels.
Using Priority Scan and Priority Plus Scan for important channels.
Adjusting display dimmer, information display, and key beep.
Enabling/disabling APCO 25 card, setting squelch modes, and muting.
Features for scanning and monitoring trunked systems.
How to search for active talkgroups or scan stored ones.
Locking out unwanted talkgroups or entire EDACS agencies/fleets.
Holding on an active or selected talkgroup for monitoring.
Starting searches, holding, setting ranges, and searching trunk systems.
Configuring tones, attenuating signals, and setting search delays.
Utilizing preprogrammed service searches and skipping unwanted frequencies.
Searching for NOAA broadcasts and configuring SAME weather alerts.
Testing the functionality and sounds of weather alert notifications.
Configuring banks and assigning names for easier identification.
Deleting, transferring, entering tags, and programming best practices.
Programming channels, setting delay, tones, beep alert, attenuator.
Changing frequency steps, modulation, and setting priority channels.
Introduction to APCO 25, Motorola, EDACS, and LTR trunking systems.
Programming Motorola Type 2/Digital and Type I/IIi Hybrid systems.
Programming EDACS Wide, Narrow, and SCAT systems.
Steps for programming LTR systems and setting trunking delay.
Setting priority talkgroups, using I-Call, and Multi-Track operation.
Programming Motorola control channels and Type 2/Digital systems.
Programming Type I or IIi Hybrid systems using fleet maps.
Options for handling Motorola status bits and end code detection.
Setting EDACS emergency alerts and decimal mode.
Adjusting sound quality for optimal APCO 25 digital audio.
Steps for programming LTR trunking systems and talkgroups.
Storing, finding, deleting talkgroup IDs, and adding tags.
Connecting to PC for control and cloning settings to another scanner.
Proper use, placement, cleaning, and handling of birdies.
Information on handling repairs and initial troubleshooting steps.
Solutions for scanner not working, poor reception, and scan issues.
Resolving issues with trunk tracking, missing replies, and no audio.
Specifications for channels, frequency range, power, size, and weight.
Definitions of terms like Alpha Tag, CTCSS, DCS, PC Control.
Explanation of Motorola status bits and talkgroup functionality.
Pre-programmed and custom fleet map configurations for Type I systems.
Table of size codes and their limitations for fleet map creation.
List of NWR SAME event codes and their corresponding LCD display text.
List of reverse frequencies used in trunked systems by band plan.
Visual representation of service search and chain search menu navigation.
Details of Uniden's limited warranty, coverage, and exclusions.
To Next Page