Uniden Dect 1635 Series - Call Transfer Procedure

17
#Some of the functions may not be available under the power failure back
up system.
Redial List/Phone book
1. Place the handset on the base and press REDIAL/PAUSE or
phonebook icon.
2. Press the
or key and select the desired number.
3. Press TALK/FLASH to dial out the number.
Multi-Handset Features
Conference Calling
•When an outside call comes in, two handsets can join in a
conference call with the outside caller.
•To join a call that’s already in progress, just press TALK /FLASH or
SPEAKER.
•To leave the conference call, hang up normally; the other handset
remains connected to the call.
To... Press...
transfer a call INTCOM/CLEAR. The phone puts
the call on hold and prompts you to
select the handset you want to page.
When the other handset accepts the
call, you’ll be disconnected (press
TALK /FLASH to rejoin the call).
cancel a transfer TALK /FLASH to return to the call.
accept a transferred call INTCOM/CLEAR
to answer the page
and speak to the other handset.
Then, press TALK/FLASH
to speak
to the caller.
Call Transfer