18
Privacy Mode
•To activate privacy mode on a call in progress, press MENU/
SELECT and select Privacy Mode. As long as privacy mode is on,
you’ll see a P in the display, and no other handsets can join your call.
•Privacy mode turns off automatically when you hang up; you can also
turn it off by pressing MENU/SELECT and selecting Privacy Mode.
Handset to Handset Intercom
•Whenever the phone is in standby, you can make an intercom call
between handsets without using the phone line.
•If an outside call comes in during an intercom page, the phone
cancels the page so you can answer the incoming call.
•If an outside call comes in during an intercom call, press TALK/
FLASH to hang up the intercom call and answer the outside call.
To... Press...
make an intercom page INTCOM/CLEAR
.
Select the handset
you want to talk with, or
All
to page all
handsets at the same time
cancel a page END
answer a page
INTCOM/CLEAR or TALK/FLASH
end an intercom call
END. Both handsets return to standby.
Chain Dialing
If you often have to enter a series of digits or a code number during a
call, you can save that code number to a phonebook entry and use the
phonebook to send the code number.
1. Enter the code number (up to 20 digits) into the phonebook just like a
regular phonebook entry. Be sure to enter the code number into the
phonebook exactly as you would enter it during a call.
2. When you hear the prompt that tells you to enter the number, open the
phonebook and find the entry that contains your code number.
3. Press MENU/SELECT to send the code. If you change your mind, just
close the phonebook.
To Next Page
Loading...
Need help?
General
