15
Operation
Operating the UHF CB Radio in Duplex Mode
For this example we are adopting CH01 as the channel being used in
your area for repeater use.
1. Press
2 times. The duplex setting ashes.
2. Turn the Channel Selector or press
/ to change the setting
between simplex and duplex (“ r ” for repeater channels 01 - 08 or “ n “
for repeater channels 41 - 48).
3. Press to store the setting.
4. Press and hold
to save & exit the menu mode. Only channels
01 - 08 and 41 - 48 are available for Duplex.
NOTE
Check with your local Retailer or ACMA (AUS)/RSM (NZ)
website for information on available repeaters.
Scanning
The scan feature allows you to search for active channels automatically.
The UH6000 has two types of scanning; Open Scanning (OS) and
Group Scanning (GS), to give you exibility and allow you to use the
radio more effectively.
1. Press and Scanning starts. The icon appears. The scan
direction can be changed at any time by rotating the channel selector
left or right.
UNIDEN UH6000 UHF CB Transceiver
To Next Page
Loading...
Need help?
General
