Need help?Do you have a question about the Uniden UH9080 and is the answer not in the manual?
General| Brand | Uniden |
|---|---|
| Model | UH9080 |
| Category | Transceiver |
| Language | English |
Instructions on how to turn the transceiver on by pressing the POWER button.
Guides on setting the auto squelch level with 5 preset sensitivity levels.
Steps to program the first instant priority channel.
Steps to program the second instant priority channel.
Instructions on how to select a channel using the up/down buttons.
How to activate/deactivate Triple Watch to monitor channels.
Instructions on how to transmit using the PTT button.
Explains how to set CTCSS codes for privacy.
Explains how to set DCS codes for enhanced privacy.
Explains how repeaters extend radio range and the concept of duplexing.
Steps to set the radio to operate in Duplex Mode.
Explains the scanning feature and its three modes: Open, Group, Master.
Details the Master Scan mode for continual communication in groups.
Explains Master Scan configurations and channel selections.
How to select and use Open Scan mode for continuous channel scanning.
How to select and use Group Scan mode for monitoring channels.
How to turn Priority Watch On/Off to monitor a priority channel.
How to enable Busy Channel Lockout to prevent transmitting on busy channels.
How to enable/disable voice scrambling for private communication.
How to record and replay received signals automatically.
How to enable or disable the automatic recording of Instant Replay.
Explains how to program up to 100 receive-only channels.
How the Close Call feature detects and displays nearby transmission frequencies.
Explains the Selective Calling (Selcall) system for group communication.
Steps to set your radio's Selcall ID for identification.
Guides on how to make a Selcall call to other radios.
Explains how to respond to and transmit Group Calls.
Settings related to Selcall, including Tone Period.
How to configure the Call Alarm mode (Auto or Continue).
To Next Page
