Uniden UH9080 User Manual

Turning on the Power
Press and hold [POWER].
NOTE
Low-Voltage/High-Voltage Alert
Th UH9060/UH9080 can operate on 12VDC (13.8V) or 24VDC (27.6V)
power supply, with the range between 10.2VDC to 28.8VDC.
If the power supply voltage exceeds 30VDC, an alert tone sounds and
HI DCÀDVKHVIRUVHFRQGV7KHSRZHUVRXUFHPXVWQRWH[FHHG9'&
otherwise permanent damage may occur to your radio, which may not be
covered by the manufacturer’s warranty.
If the input voltage falls below 10VDC, LO DCÀDVKHVIRUVHFRQGV7KH
power turns off automatically if voltage falls below 9.0VDC.
Switch your UH9060/UH9080 OFF and disconnect it from the power source,
before locating the cause of the power supply problem.
Operation
15
UNIDEN UH9060/UH9080 UHF CB Transceiver

Uniden UH9080 Specifications

General

Brand	Uniden
Model	UH9080
Category	Transceiver
Language	English