Uniden UM415BK User Manual

10
English
Button Press to... Press and hold to...
16/9-TRI
1
st
press: Go to Channel 16.
2
nd
press: Go to Channel 9.
3
rd
press: Go back to the original channel.
Go into Triple Watch or Dual
Watch mode (see page 18).
PUSH-TO
TALK
Cancel scanning and stay on a channel. Talk on a channel.
SCAN/MEM Activate the channel scan feature; start
scanning channels.
Save/delete the current channel
from memory.
NOTE: SCAN/MEM on the microphone functions the same as the SCAN and MEM buttons on the
radio.
Turning on the Radio
Turn the VOLUME-PWR knob clockwise to turn on the radio. As it powers on, the radio displays
the user MMSI number; if there is no MMSI set, the radio displays MMSI not entered.
When it powers on, the radio selects the last channel used.

The radio comes preset to use the UIC channels assigned for the United States. If you are
operating in an area that uses Canadian or international UIC channels, you will need to
change the channel mode.
Press and hold CALL-MENU to display the normal menu, and choose the Setup sub-menu.
Select USA/CAN/INT. The screen displays the UIC channel setup.
Choose the channel mode you want to use: US (USA Mode), Canadian (Canada Mode), or
international (Intl Mode).
Press ENT-1W/25W . The radio activates the new channel mode and exits the menu.
1.
2.
3.
4.
16
UIC Channels
USA Mode
Canada Mode
Intl Mode
Back[CLR]
Select[ENT]
Setup
Press and hold -
USA/CAN/INT
16
UIC Channels
USA Mode
Canada Mode
Intl Mode
Back[CLR]
Select[ENT]
Setup
Press and hold -
USA/CAN/INT

Uniden UM415BK Specifications

General

Brand	Uniden
Model	UM415BK
Category	Marine Radio
Language	English