23
English
Group MMSI number
You can change the group MMSI number as often as you want. Follow the steps below to
enter a group MMSI number into the radio:
Display the normal menu and choose the Setup sub-menu.
Select Group MMSI. If one was entered previously, the screen displays it.
Group MMSI numbers always start with a 0, so that digit is already entered for you.
Use
CHANNEL UP
and
CHANNEL DOWN
to change the second of the nine digits;
CHANNEL UP
increases the number and
CHANNEL DOWN
button decreases it.
When the second digit is correct, press the
ENT-1W/25W
. The cursor moves to the next
digit. Enter the remaining seven digits of the MMSI number in the same way. If you make
a mistake while entering a number, press
CLR-SCAN
to erase the wrong number and the
cursor is moved to the left digit.
When the ninth digit is correct, press
ENT-1W/25W
. The radio displays the new MMSI
number and asks you to confirm.
To save this MMSI number, select Yes and confirm the entry. To cancel this MMSI
number, select No. The radio returns to the Setup menu.
Using the Directory
The directory lets you store up to 20 MMSI numbers of other stations so you can call them
quickly.
Follow the steps below to edit the MMSI numbers in your directory:
Press
CALL-MENU
to display the call menu.
Select Directory. The screen displays any previously-entered MMSI numbers and names.
To add a new MMSI number to the directory, select New.
The radio prompts you to enter the nine-digit MMSI number. Use
CHANNEL UP
and
CHANNEL DOWN
to change the first digit; the
CHANNEL UP
button increases the number and
the
CHANNEL DOWN
button decreases it.
1.
2.
3.
4.
5.
6.
1.
2.
3.
4.
To Next Page
Loading...
Need help?
General
