Need help?Do you have a question about the Uniden XTRAK 50 Series and is the answer not in the manual?
General| Brand | Uniden |
|---|---|
| Model | XTRAK 50 Series |
| Category | Transceiver |
| Language | English |
Details the IP67 water and dust ingress standard for the radio.
Warns about battery handling, charging, and disposal precautions.
Outlines licensing requirements for CB radio service in Australia and New Zealand.
Lists key features of the XTRAK 50 / XTRAK 50 PRO radio.
Highlights advanced functions like Instant Replay and Bluetooth.
Lists physical and display controls for the radio.
Summarizes channel management capabilities.
Lists optional accessories available for purchase with the radio.
Instructions for attaching the 477MHz antenna to the radio.
Steps for attaching or removing the beltclip from the battery pack.
Instructions for installing and securing the lithium-ion battery pack.
How to connect the charger to power and the radio.
Details the process and indicators for charging the battery.
Explains the battery level indicator and expected battery life.
Describes the feature that conserves battery life during standby.
Importance of keeping the accessory jack cover for waterproof rating.
Lists all available menu options and their order.
Basic operations for turning on/off, adjusting volume, and changing channels.
How to set the squelch level to reduce background noise.
Steps for transmitting and receiving, including power levels.
Explains the programmable SMART key and Instant Channel function.
How to use the Call function and select calling tones.
Describes Equaliser settings and how to activate Monitor Mode.
Information on pairing the device with other Bluetooth devices.
Explains using repeater channels and operating in duplex mode.
Introduction to the scan feature and its modes.
How to add or remove channels from scan memory.
How to enable or disable priority watch for group scanning.
How to configure CTCSS and DCS codes for squelch.
Explains Busy Channel Lock-out and Voice Scramble functions.
Configuration options for voice activation, roger beep, and key beeps.
How to adjust display brightness and activate keypad lock.
How to use the LED torch and S.O.S strobe function.
How to record and playback received signals.
Steps to enable or disable automatic signal recording.
Overview of the Master Scan feature for continuous communication.
Configuration steps for Master Scan channel groups and subcodes.
Instructions for installing and connecting the XTRAK App via Bluetooth.
How to connect the radio to Bluetooth audio devices for sound output.
To Next Page
