What to do if the PTT is pressed and another radio can hear a click but no audio on my Uniden Transceiver?
If the transmit light comes on when you press the PTT button, and another radio only hears a click but no audio from your Uniden Transceiver, this could indicate a faulty microphone element. In this case, the device should be sent in for repair.
Why does my Uniden Transceiver revert to channel 16 when I press the transmit key?
If your Uniden Transceiver reverts to channel 16 when the transmit key is pressed, it might be due to low current or voltage. Ensure the device is connected to a 12VDC power source capable of supplying at least 4 Amps.
Details the function of each button, dial, and switch on the marine radio unit.
Identifies and describes connectors for antenna, speaker, and power.
Detailed steps for mounting the radio, including drilling and connecting power leads.
Connecting the power cord and securing the radio in the bracket.
How to adjust the squelch control to filter out background noise.
Procedure for choosing a specific communication channel using up/down buttons.
How to select between 1W (LO) and 25W (HI) transmitter output power.
Steps to activate and end transmission using the PTT button.
Addresses common symptoms like no power, channel reversion, and audio issues with suggested remedies.
General| DSC | Yes |
|---|---|
| Dimensions | Varies by model |
| Weight | Varies by model |
| Waterproof | Yes |
| Display | LCD |
To Next Page