Mounting the PoE Adapter (Optional)
1. Remove the PoE Mounting Bracket from the adapter, place the
bracket at the desired location, and mark the two holes.
2. Pre-drill the holes if necessary, and secure the bracket using two
fasteners (not included).
3. Align the adapter’s slots with the tabs of the PoE Mounting Bracket,
and then slide the adapter down.
Software Installation
Download and install the latest version of the UniFi Controller
software. Launch it and follow the on-screen instructions. The
software and step-by-step instructions in the User Guide are available
at:
ui.com/download/uni
After you have installed the software and run the UniFi Installation
Wizard, a login screen will appear for the UniFi Controller
management interface. Enter the username and password that you
created and click Sign In.
UAP-AC-LITE Quick Start Guide
To Next Page
Loading...
