To Next PageTo Next Page
Need help?Do you have a question about the UniFi UBB and is the answer not in the manual?
General| Device Type | Wireless Bridge |
|---|---|
| Frequency Band | 5 GHz |
| Operating Temperature | -40 to 60° C (-40 to 140° F) |
| Weatherproof | Yes |
| Certifications | CE, FCC, IC |
| Management | UniFi Network Controller |
| Product Name | UniFi Building-to-Building Bridge |
| Category | Wireless Access Point |
| Range | Up to 500 meters |
| Networking Interface | 1 Gbps Ethernet |
| Power Method | Passive PoE (Pairs 4, 5+; 7, 8 Return) |
| Enclosure Materials | Polycarbonate |
| Power Supply | PoE injector (included) |
| Operating Humidity | 5 to 95% Noncondensing |
| Wireless Security | WPA2-PSK |
| Wireless Technology | 802.11ac |
| Mounting | Pole, Wall |
Lists all included UBB units and accessories.
Details the included PoE adapter and mounting bracket.
Specifies required controller hardware and software versions.
Lists supported OS and required software like Java.
Covers pole/wall mounting tools and line-of-sight needs.
Details shielded cabling and surge protection recommendations.
Explains the meaning of different system LED states.
Step-by-step instructions for mounting the UBB on a pole.
Specifies mounting surface requirements and optional kit.
Details the initial steps for wall mounting the device.
Instructions for visually aiming the UBB radios at each other.
Explains the polarity alignment indicator on the device.
Illustrates the procedure for connecting power to the UBB unit.
Lists options for adopting the UBB radios.
Note on resetting radios to re-establish a lost link.
Guides on downloading and setting up the UniFi Network App.
Shows the main dashboard view of the app.
Instructions to access the Devices section in the controller.
Lists the physical dimensions and weight of the UBB.
Provides antenna gain specifications for different bands.
Important safety instructions and hazard warnings.
Outlines the warranty's arbitration requirements for dispute resolution.
Details compliance with FCC rules and conditions.
Covers compliance for Australia/New Zealand and Brazil.
Explains CE Marking and applicable directives.
Indicates where to find additional online resources and support.
