UniFi Network App (iOS or Android™) or Web Browser
(Google Chrome preferred)
Installation Requirements
Pole-mounting: 8 mm socket wrench or screwdriver
Wall-mounting: wall fastener (not included)
The device needs to have clear line of sight to the sky for
proper GPS operation.
Shielded Category 5 (or above) cabling with drain wire
should be used for all wired Ethernet connections and
should be grounded through the AC ground of the PoE.
We recommend that you protect your networks from harmful
outdoor environments and destructive ESD events with
industrial-grade, shielded Ethernet cable from Ubiquiti. For
more details, visit ui.com/toughcable
Surge protection should be used for all outdoor installations.
We recommend that you use two Ethernet Surge
Protectors, model ETH-SP-G2, one near the device and the
other at the entry point to the building. The ETH-SP-G2 will
absorb power surges and safely discharge them into the
ground.
To Next Page
Loading...
Need help?
General
