Need help?Do you have a question about the UniFi AC Mesh and is the answer not in the manual?
General| Wireless Standards | 802.11 a/b/g/n/ac |
|---|---|
| Frequency Band | 2.4 GHz, 5 GHz |
| Antenna Gain | 2.4 GHz: 3 dBi, 5 GHz: 4 dBi |
| Maximum Power Consumption | 8.5W |
| Wireless Security | WEP, WPA-PSK, WPA-Enterprise (WPA/WPA2, TKIP/AES) |
| Supported Voltage Range | 44-57VDC |
| Max. TX Power | 2.4 GHz: 20 dBm, 5 GHz: 20 dBm |
| BSSID | Up to 4 per Radio |
| Operating Temperature | -30 to 70° C (-22 to 158° F) |
| Operating Humidity | 5 to 95% Noncondensing |
| Certifications | CE, FCC, IC |
| MIMO | 2x2 |
| Power Method | Passive PoE (Pairs 4, 5+; 7, 8 Return) |
| Networking Interface | 10/100/1000 Ethernet |
| Mounting | Wall, Pole |
| Antennas | 2 Dual-Band Antennas |
| Wireless Speed | 867 Mbps |
| Data Rate | Up to 867 Mbps (5 GHz), 300 Mbps (2.4 GHz) |
Overview of the LED indicator status for the UniFi AP.
Details about the available ports on the UniFi AP.
Step-by-step guide for mounting the UniFi AP on a wall.
Instructions for mounting the UniFi AP on a pole.
How to use the fast-mount adapter for installation.
Guide for connecting the Ethernet cable to the UniFi AP.
Guide for connecting the power supply to the UniFi AP.
Process for adopting the UniFi AP into the network wirelessly.
Steps to download and install the UniFi Controller software.
Approved antenna types and their maximum gain limits.
Specific gain values for different antenna types.
Important safety precautions and warnings for device usage.
Guidelines for safe electrical connections and grounding.
Details on the device's limited warranty and arbitration.
Device compliance with FCC regulations and operational rules.
Device compliance with ISED Canada regulations.
Compliance information for Australia and New Zealand.
Explanation of the CE marking indicating product compliance.
To Next Page
