To Next PageTo Next Page
Need help?Do you have a question about the UniFi AP AC Lite and is the answer not in the manual?
General| Wireless Standards | 802.11 a/b/g/n/ac |
|---|---|
| Frequency Bands | 2.4 GHz, 5 GHz |
| MIMO | 2x2 |
| Wireless Security | WEP, WPA-PSK, WPA-Enterprise (WPA/WPA2, TKIP/AES) |
| Maximum Power Consumption | 6.5W |
| Max. TX Power | 20 dBm |
| Operating Temperature | -10 to 70° C (14 to 158° F) |
| Operating Humidity | 5 to 95% Noncondensing |
| Certifications | CE, FCC, IC |
| Maximum Throughput | 300 Mbps (2.4 GHz), 867 Mbps (5 GHz) |
| Ports | 1x 10/100/1000 Ethernet Port |
| Power Method | PoE (802.3af), 24V passive PoE |
| Dimensions | 160 x 31.45 mm (6.3 x 1.24") |
| Weight | 170 g |
| Power Supply | 24V, 0.5A Gigabit PoE Adapter |
| Data Rates | 802.11a: 6, 9, 12, 18, 24, 36, 48, 54 Mbps; 802.11n: 6.5 Mbps to 300 Mbps (MCS0 - MCS15, HT 20/40); 802.11ac: 6.5 Mbps to 867 Mbps (MCS0 - MCS9, NSS1/2, VHT 20/40/80) |
| Antenna | Internal |
| Mounting | Wall/Ceiling |
The notch on the AP used with the mounting bracket for secure attachment.
Explains the AP reset button's functions for restarting and restoring factory defaults.
Details the Gigabit Ethernet port for connecting power and the LAN network.
Instructions for removing the plug to route the Ethernet cable through the mounting surface.
Describes how the mounting bracket's locking tab secures the AP and prevents theft.
Guide on powering the UniFi AP directly via a UniFi PoE switch port.
Steps for powering the UniFi AP using the provided Gigabit PoE adapter and power cord.
Key warnings and precautions for safe operation and installation of the UniFi AP.
Information on electrical safety compliance, grounding, and the need for qualified service.
Details the limited warranty terms, including arbitration for dispute resolution.
States compliance with FCC Part 15 rules and the conditions for safe operation.
Outlines compliance with ISED Canada license-exempt RSS standards and operational rules.
Covers compliance with radiation exposure limits and minimum installation distance requirements.
Notes compliance with CISPR 32 for Australia/New Zealand and potential radio interference.
Brazilian regulatory note stating the equipment is authorized to operate without causing interference.
Indicates the product meets all applicable European Union directives.
Statement regarding compliance with Waste Electrical and Electronic Equipment regulations.
Formal statement confirming the product's conformity with relevant directives and standards.
References and links to additional support, documentation, and community forums.
