UniFi UBB User Manual

Worldwide 2400 - 2483.5
Safety Notices
1. Read, follow, and keep these instructions.
2. Heed all warnings.
3. Only use attachments/accessories specified by the manufacturer.
WARNING: Do not use this product in location that can be
submerged by water.
WARNING: Avoid using this product during an electrical
storm. There may be a remote risk of electric shock from
lightning.
Safety Notices
1. Read, follow, and keep these instructions.
2. Heed all warnings.
3. Only use attachments/accessories specified by the manufacturer.
WARNING: Do not use this product in location that can be
submerged by water.
WARNING: Avoid using this product during an electrical
storm. There may be a remote risk of electric shock from
lightning.
Electrical Safety Information
1. Compliance is required with respect to voltage, frequency, and
current requirements indicated on the manufacturer’s label.
Connection to a different power source than those specified may
result in improper operation, damage to the equipment or pose a fire
hazard if the limitations are not followed.
2. There are no operator serviceable parts inside this equipment.
Service should be provided only by a qualified service technician.
3. This equipment is provided with a detachable power cord which has
an integral safety ground wire intended for connection to a grounded

UniFi UBB Specifications

General

Device Type	Wireless Bridge
Frequency Band	5 GHz
Operating Temperature	-40 to 60° C (-40 to 140° F)
Weatherproof	Yes
Certifications	CE, FCC, IC
Management	UniFi Network Controller
Product Name	UniFi Building-to-Building Bridge
Category	Wireless Access Point
Range	Up to 500 meters
Networking Interface	1 Gbps Ethernet
Power Method	Passive PoE (Pairs 4, 5+; 7, 8 Return)
Enclosure Materials	Polycarbonate
Power Supply	PoE injector (included)
Operating Humidity	5 to 95% Noncondensing
Wireless Security	WPA2-PSK
Wireless Technology	802.11ac
Mounting	Pole, Wall