UniFi UBB User Manual

safety outlet.
a. Do not substitute the power cord with one that is not the
provided approved type. Never use an adapter plug to connect to
a 2-wire outlet as this will defeat the continuity of the grounding
wire.
b. The equipment requires the use of the ground wire as a part of
the safety certification, modification or misuse can provide a
shock hazard that can result in serious injury or death.
c. Contact a qualified electrician or the manufacturer if there are
questions about the installation prior to connecting the
equipment.
d. Protective earthing is provided by Listed AC adapter. Building
installation shall provide appropriate short-circuit backup
protection.
e. Protective bonding must be installed in accordance with local
national wiring rules and regulations.
Electrical Safety Information
1. Compliance is required with respect to voltage, frequency, and
current requirements indicated on the manufacturer’s label.
Connection to a different power source than those specified may
result in improper operation, damage to the equipment or pose a fire
hazard if the limitations are not followed.
2. There are no operator serviceable parts inside this equipment.
Service should be provided only by a qualified service technician.
3. This equipment is provided with a detachable power cord which has
an integral safety ground wire intended for connection to a grounded
safety outlet.
a. Do not substitute the power cord with one that is not the
provided approved type. Never use an adapter plug to connect to
a 2-wire outlet as this will defeat the continuity of the grounding
wire.
b. The equipment requires the use of the ground wire as a part of
the safety certification, modification or misuse can provide a
shock hazard that can result in serious injury or death.
c. Contact a qualified electrician or the manufacturer if there are
questions about the installation prior to connecting the
equipment.
d. Protective earthing is provided by Listed AC adapter. Building
installation shall provide appropriate short-circuit backup
protection.

UniFi UBB Specifications

General

Device Type	Wireless Bridge
Frequency Band	5 GHz
Operating Temperature	-40 to 60° C (-40 to 140° F)
Weatherproof	Yes
Certifications	CE, FCC, IC
Management	UniFi Network Controller
Product Name	UniFi Building-to-Building Bridge
Category	Wireless Access Point
Range	Up to 500 meters
Networking Interface	1 Gbps Ethernet
Power Method	Passive PoE (Pairs 4, 5+; 7, 8 Return)
Enclosure Materials	Polycarbonate
Power Supply	PoE injector (included)
Operating Humidity	5 to 95% Noncondensing
Wireless Security	WPA2-PSK
Wireless Technology	802.11ac
Mounting	Pole, Wall