18 Description
Accessories
Desktop Charger
Figure 5 Desktop Charger for WLAN Handset
There is one desktop charger available, (DC3) which charges the handset. There is also a desktop
programmer (DP1) used to download new software and to synchronize parameters. They look the
same except that the DP1 has a USB connection. The handset is fully operational while placed in
the charger.
The charger is delivered with a plug-in power supply, and is connected to an ordinary wall socket.
Rack Charger
The rack charger is used to charge up to six handsets at the same time.
For further information please have a look at the supplied documentation.
Battery Pack Charger
The battery pack charger (CR4) is used to charge up to six spare batteries.
For further information please have a look at the supplied documentation.
Clip
There are two belt clips available:
• Hinge-type clip
To prevent the handset from slipping out of, for example, a pocket or belt, see "Troubleshoot-
ing" on page 66.
• Swivel-type clip
To be able to rotate the handset without slipping out from, for example, a pocket or belt, see
"Attach the Swivel-type Clip" on page 65.
Only use the charger within the temperature range of +5° C – +40° C. Only use the power
supply provided.
It is possible to use the handset without any attached clip, see "Attach Cover for No Clip" on
page 65.
The belt clips cannot be used if the handset is placed in a case. See "Leather Casing" on
page 19 for more information.
To Next Page
Loading...
Need help?
General