Unify OpenStage WL3 User Manual

52 Menu Operation
Rotate Display Text
The handset can be configured to show the contents of the display (except the soft key bar) up-
side-down at incoming calls or messages. This setting makes it possible to check the display while
the handset remains clipped to a belt or pocket. The display reverts to normal when any key is
pressed (except up/down on the Navigation key).
1. Press “Menu”.
2. Select “Settings” in the menu.
3. Select “Display”.
4. Select “Rotate display text”.
5. Select “Normal” or “Inverted”.
6. Press “Back” repeatedly until the idle screen appears.
Font style
The handset may be configured to show menu texts in bold font for increased readability.
1. Press “Menu”.
2. Select “Settings” in the menu.
3. Select “Display”.
4. Select “Font style”.
5. Select “Normal” or “Bold”.
Time & Date Settings
Time and date format changes in the handset appear directly, but changes in the system appear
after a maximum of 24 hours after a change in the system or by turning the handset off and on
again.
Set Time Format
1. Press “Menu”.
2. Select “Settings” in the menu.
3. Select “Time & Date”.
4. Press “Select”.
5. Select Time format. The actual time format is displayed. Selectable time format:
12:00 (am/pm)
24:00
6. Press “Select” to save the setting.
Set Date Format
1. Press “Menu”.
2. Select “Settings” in the menu.
3. Select “Time & Date”.
4. Press “Select”.
5. Select “Date format”, press “Select”. Selectable date format:
Date format Example Designation
DD MMM YY 10 Jan 09
MMM DD YYYY Jan 10 2009
YYYY-MM-DD 2009-01-10 (ISO 8601)
MM/DD/YYYY 1/10/2009 (also called US)
DD/MM/YYYY 10/01/2009 (also called Europe)

Unify OpenStage WL3 Specifications

General

Brand	Unify
Model	OpenStage WL3
Category	Handsets
Language	English