Unigas G400A - Attention! if it is necessary to change the head position; CAUTION: perform these adjustments once the burner is turned off and cooled.

PART III: OPERATION
39
FLUIDICS KW3...60°
NOZZLE SUPPLY PRESSURE = 20 bar. VISCOSITY AT NOZZLE = 5 cS
Pressure on return (bar)
Flow rate [kg/h]
Pressure on return (bar)
Flow rate [kg/h]
The nominal size of the nozzle is indicated at the ends of the
curve
The nominal size of the nozzle is indicated at the ends of the
curve