Unilumin Upanel 1.9S User Manual

Unilumin Upanel 1.9S Specifications

General

Brand	Unilumin
Model	Upanel 1.9S
Category	Monitor
Language	English

Summary

Chapter 1 Product Introduction

1.3 Specification

Detailed technical specifications for Upanels LED displays.

1.4 System Solution

Chapter 2 Installation and Wiring

2.2 General Installation

Steps for physically assembling the LED display.

2.3.2 Signal Cable Connection

2.3.3 Power Cable Connection

2.3.4 Smart Control Distribution Box

Chapter 3 LED Display Control Setting

3.1 Power-on Testing

3.3 Display Configuration

Configuring display parameters and settings.

3.5 Correction Coefficient Management

Process for managing display calibration data.

3.5.1 Setting Coefficients for a New Receiving Card

Recalibrating after receiving card replacement.

3.5.2 Setting Coefficients for a New Module

Recalibrating after module replacement.

Chapter 4 LED Display Playing Setting

4.2 Playing Setting

4.3 Editing Professional Playing Solution

Advanced setup for media playback.

4.3.1 Editing the Time Segment

4.3.2 Editing the Program Page

4.3.3 Editing the Display Window

4.3.4 Editing the Media

Chapter 5 Startup, Shutdown, and Maintenance

5.3 Daily Maintenance

Chapter 6 Troubleshooting and Component Replacement

6.1 Common Faults and Troubleshooting Methods

Diagnosing and resolving typical issues.

6.1.1 Failure in Lighting up the Display

Resolving power or signal issues causing no image.

6.1.2 Incomplete Picture or Incorrect Position of Picture Displayed

Fixing content display errors.

6.1.3 Screen Blinking

Troubleshooting screen flickering issues.

6.1.4 Blinking of a Cabinet in the Display

6.1.5 Failure in Lighting up of a Cabinet in the Display

6.1.6 Failure in Lighting up Part of the Modules in the Cabinet

6.2 Replacement of Main Components

Overview of replacing major parts.

6.2.1 Replacement of Module

Procedure for swapping out a display module.

6.2.2 Replacement of Power Supply

Procedure for swapping out the power supply.

6.2.3 Replacement of Power/Signal Input Cable Switching Board

Procedure for replacing the switching board.

6.2.4 Replacement of Receiving Card

Procedure for swapping out the receiving card.