Need help?Do you have a question about the Unimig KT 50 and is the answer not in the manual?
Identifies inherent dangers during operation including electric voltage, heat, fumes, and pressurized gas.
Details harmful effects on users and equipment from electric shock, arc rays, fumes, fire, and EM interference.
Provides detailed technical specifications for the power source unit, including electrical and dimensional data.
Lists comprehensive technical specifications for the wire feeder unit, covering its performance and physical attributes.
Details mounting the wire reel, adjusting the wire feed mechanism, and loading welding wire.
Details the operation of 2-stroke and 4-stroke welding modes activated via the function selector switch.
Describes how to set up and perform spot welding and interval welding with adjustable time parameters.
Provides initial steps for troubleshooting common problems like no power, blown fuses, or absence of welding arc.
Guides on diagnosing and fixing issues related to gas flow, wire feeding irregularities, and weld quality.
Offers advice on enhancing weld quality by adjusting parameters and addressing surface contamination.
Provides recommended welding parameters (current, voltage, speed) for different metal types and thicknesses.
Explains the influence of welding current, arc voltage, wire stickout, and polarity on weld quality.
General| Brand | Unimig |
|---|---|
| Model | KT 50 |
| Category | Welding System |
| Language | English |
To Next Page