AC-2100 User Guide 33
3.4.2.4. Gateway Setting
< Gateway >
192.168.000.001
[] [] [] []
After moving to the position of a digit to
change using [][] button, change the
value using [][] button.
The gateway IP address of the network which the terminal is connected to is
entered.
After carefully entering the value, press down [F4] button for a longer period of
time to continue setting.
3.4.3. Server IP Setting
At default screen [F3~] [2.Network] [3.Server IP]
3.4.3.1. Server IP Setting
< Server IP >
192.168.000.002
[] [] [] []
After moving to the position of a digit to
change using [][] button, change the
value using [][] button.
The IP address of the network server which the terminal is connected to is
designated.
After carefully entering the value, press [F4] button for a longer period of time
to continue setting.
3.4.3.2. Server Port Setting
< Server Port >
Num : 9870
[] [] [] []
After moving to the position of a digit to
change using [][] button, change the
value using [][] button.
This is an item that enters the port of the authentication server. The default port
value of the authentication server is ‘9870’. Note that if this value is changed,
the value at the server program must also be changed.
UNIONCOMMUNITY
Co., Ltd. / 3F Hyundai Topix Bldg. 44-3 Bangi-dong Songpa-gu
Seoul, Korea (138-050)
Tel : 02-6488-3000 , Fax : 02-6488-3099, E-Mail :sales@unioncomm.co.kr
http
://www.unioncomm.co.kr
After carefully entering the value, press down [F4] button for a longer period of
To Next Page
Loading...
Need help?
General
