Union Community Virdi AC-2100 User Manual

AC-2100 User Guide 43
<LCD Backlight>
1.On
2.Off
[ESC][󰄬][󰄮][ENT]
Default setting: ‘2.Off’
This option sets the on/off state of the terminal LCD backlight.
If it is set to ‘1.On’, the LCD backlight is always on. If it is set to ‘2.Off’, the LCD
backlight is off except during key or card operation. The light is switched off
automatically about 10 seconds after a key or card operation is completed.
Press [ENT] button to continue setting.
3.5.5.2. LCD Brightness Setting
<LCD Light Ctrl>
0.Low
1.Medium
2.High
[ESC][󰄬][󰄮][ENT]
Default setting: ‘1’
This option sets the brightness of the terminal LCD light. Select ‘0’ for dim light
and ‘2’ for bright light.
After selecting a setting value, press [ENT] button to move to the upper menu.
3.5.6. Time Setting
If “3.Option” is selected at the main me
nu, the following screen is displayed.
1. Application
2.
Verify Option
3. Set Doorlock
4. Sound Control
5. LCD Setting
6. Time Setting
[ESC][󰄬][󰄮][ENT]
Select [6] to set the current time.
3.5.6.1. Time Synchronization
UNIONCOMMUNITY
Co., Ltd. / 3F Hyundai Topix Bldg. 44-3 Bangi-dong Songpa-gu
Seoul, Korea (138-050)
Tel : 02-6488-3000 , Fax : 02-6488-3099, E-Mail :sales@unioncomm.co.kr
http
://www.unioncomm.co.kr

Union Community Virdi AC-2100 Specifications

General

Brand	Union Community
Model	Virdi AC-2100
Category	IP Access Controllers
Language	English