Union Community Virdi AC-2100 User Manual

AC-2100 User Guide 41
normal door operation.
To use this function, the lock must have a monitoring function that checks the
opening/locking of the door. Also, the monitoring pin of the lock must be
connected to the terminal. In addition, the door open state check in the
previous item must be set to ‘1’ or ‘2’ in order to set this function.
After selecting a setting value, press down [F4] button for a longer period of
time to continue setting. Afterwards, all settings for the door are completed
and the system moves to the upper menu.
3.5.4. Volume Setting
If [3.Option] is selected at the main menu, the following screen is displayed.
1. Application
2. Verify Option
3. Set Doorlock
4. Sound Control
5. LCD Setting
6. Time Setting
[ESC][󰄬][󰄮][ENT]
Select [4.Sound Control] to set volume.
3.5.4.1. Voice Volume Setting
 At default screen [F3~]  [3.Option]  [4.Sound Control] 
<Voice Volume>
0 1 2 3 4 5
[ESC][󰄫][󰄭][ENT]
Default setting: ‘3’
This option sets the volume level during voice guidance. If it is set to ‘0’, voice
message is not issued.
Press [ENT] button to continue setting.
3.5.4.2. Buzzer Volume Setting
 At default screen [F3~]  [3.Option]  [4.Sound Control]  [ENT] 
UNIONCOMMUNITY
Co., Ltd. / 3F Hyundai Topix Bldg. 44-3 Bangi-dong Songpa-gu
Seoul, Korea (138-050)
Tel : 02-6488-3000 , Fax : 02-6488-3099, E-Mail :sales@unioncomm.co.kr
http
://www.unioncomm.co.kr

Union Community Virdi AC-2100 Specifications

General

Brand	Union Community
Model	Virdi AC-2100
Category	IP Access Controllers
Language	English