Unison Research Unico 90 User Manual

6
1. FUSES
Inside the Unico 90 there are twelve fuses.:
F
s1h
, F
s2h
= 1AT / 250V
F
saf1L
, F
saf2L
= 1,5AT / 250V
F
saf1R
, F
saf2R
= 1,5AT / 250V
F
ssrv1
, F
ssrv2
= 400 mAT / 250V
F
sal1L
, F
sal2L
= 10AT / 250V
F
sal1R
, F
sal2R
= 10AT / 250V
The value for the main fuses is:
10AT / 250V (mains voltage 100V/120V) or
6,3AT / 250V (mains voltage 220V/230V/240V).
These fuses are all 5 x 20mm glass fuses. If one of these fuses
should blow we advise you to consult your Authorised Dealer or
Service Centre for advice.

Unison Research Unico 90 Specifications

Output Power

output power at 8Ω	100+100 W RMS
output power at 4Ω	180+180 W RMS

Frequency Response

frequency response at -1dB	12Hz to 45kHz
frequency response at -3dB	6Hz to 80kHz

Input Specifications

input impedance	21kΩ //300pF
input sensitivity	860mV RMS
input	6 line (3 unbalanced, 2 balanced, 1 'bypass' unbalanced)

Output Specifications

line outputs	1 tape, 1 sub (volume controlled)
output connectors	4 + 4 bi-wiring
output resistance	<0.4 ohm, resistive on all audio frequencies

Power and Consumption

power consumption	550 W (at max power on 8 ohm)
global feedback factor	0 dB
THD at 1kHz, 1 W	< 0.15%

Weight and Dimensions

dimensions	43.5cm x 18 cm x 44 cm
net weight	20 kg