Need help?Do you have a question about the Unison Research Unico Due and is the answer not in the manual?
General| Signal-to-Noise Ratio | >90 dB |
|---|---|
| Type | Integrated Amplifier |
| Output Power | 100W per channel (8Ω) |
| Inputs | 4x Line |
| Outputs | Speaker Terminals |
| Tube Complement | 2x ECC83 (12AX7) |
| Total Harmonic Distortion | <0.1% |
Describes the initial power-on sequence and warm-up phase for the amplifier.
Explains how to choose the input source using the selector knob or remote.
Details how to control the audio volume level using the knob or remote.
Describes the function of the tape/monitor input and its selection.
Explains how the mute function operates, setting volume to minimum and indicating status.
Describes the OSD function, which sets output stages to standby mode.
Explains how the display turns off after inactivity and reactivates.
Details how to adjust the channel balance using the volume knob and display.
Explains how to connect and use the Unico Due with an AV playback system.
To Next Page
