Unison Research
Unico Due
4. OPERATION
SWITCHING ON AND WARM-UP
WARNING! Switch on the Unico Due only after all the connections have been
made and checked.
Just after switching on, Unico Due starts a warm-up phase. During this phase, a
counter on the display on the front panel counts down, showing the time remaining
until the end of the warm-up phase. The output stages are disabled and the unit is in
mute until the countdown terminates.
The optimal temperature for the valves is reached less than 40 seconds after switching
on but best results will be obtained after approximately 10 minutes after switching on.
To Next Page
Loading...
