Need help?Do you have a question about the Unison Research Unico Primo and is the answer not in the manual?
Power Output| power output | 80W RMS on 8Ω both channels driven |
|---|---|
| power consumption | 380W max |
Frequency and Impedance| frequency response | -0.1dB @ 10Hz / -0.5dB @ 100kHz |
|---|---|
| input impedance | 47kΩ |
| feedback factor | 10dB |
Phono Stage| phono input impedance MM | 47kΩ // 220pF |
|---|---|
| phono input impedance MC | 100Ω // 440pF |
| phono gain MM | 40dB |
| phono gain MC | 50dB |
| phono gain setting | +0dB / +10dB |
| phono max input voltage | 120mV @ 1kHz |
| phono THD | 0.09% @ 5mV, 1kHz, MM |
Dimensions and Weight| dimensions | 17.1in x 3.5in x 17in |
|---|---|
| weight | 31lb |
Step-by-step instructions for safely removing the amplifier and accessories from its original packaging.
Guidance on proper placement for ventilation and cable management to ensure optimal performance.
Instructions for connecting the amplifier to the power supply, including important voltage warnings.
Details on switching the amplifier on, the warm-up phase, and initial operational procedures.
Identification and explanation of controls and indicators located on the front panel of the amplifier.
Identification and explanation of input/output connectors and power connections on the rear panel.
Explanation of different LED states indicating operational status, start-up, and protection modes.
Information regarding the included infrared remote control and its specific operational capabilities.
Details on the dedicated phono board, its MM/MC cartridge compatibility, and gain adjustment options.
Critical warnings regarding amplifier access, liquid spills, and operating with covers removed for user safety.
Guidelines for replacing fuses and cleaning the amplifier, including valve replacement procedures.
To Next Page
