Unison Research Unico Due User Manual

Unison Research

Unico Due
23
10. TECHNICAL SPECIFICATIONS
Output power: 100+100 W RMS at 8Ω
180+180 W RMS at 4Ω
290+290 W RMS at 2Ω
Capacitor bank value: 80,000uF
Frequency response: -1dB @ 12Hz and 100kHz
Input impedance: 47kΩ
Input stage: Pure class A, 2 ECC83 double triode valves
Output stage: Dynamic Class A power BJT double complementary pair
Inputs: 3 line RCA, 1 USB, 1 monitor
Line outputs: 1 tape RCA, 1 DAC, 1 subwoofer (volume controlled)
Output connectors: 4 + 4 bi-wiring
THD: <0.25@ 1kHz, 10W
Power Consumption: 360W (at max power on 8Ω)
Dimensions: 43.5cm x 18 cm x 44 cm
Net weight: 16 kg
PHONO STAGE
Input impedance: 47kΩ / 220 pF (MM) - 100Ω / 440pF (MC)
Gain: MM 40 dB, MC 50 dB
Gain Selection: +0 dB / +10 dB
Maximum input voltage: 120 mV @ 1kHz (MM)
RIAA Equalization: active at low frequencies, passive at high frequencies
THD: 0.09% @ 5 mV, 1kHz, MM
Technical specifications may vary without notice

Unison Research Unico Due Specifications

General

Signal-to-Noise Ratio	>90 dB
Type	Integrated Amplifier
Output Power	100W per channel (8Ω)
Inputs	4x Line
Outputs	Speaker Terminals
Tube Complement	2x ECC83 (12AX7)
Total Harmonic Distortion	<0.1%