SPECIFICATIONS
MS240/241 Manual 19
INTERFACE
Connector: PS/2, RS232, TTL, USB
(see next page for pinouts)
MAGNETIC READER
Slot width: 0.055 inches (1.37mm)
Card width: 0.010 to 0.050 inches (0.254 to 1.27mm)
Swipe speed: 3 to 55 inches per second, bi-directional
Formats: ISO 7811, AAMVA, & CA DMV
MECHANICAL
Cord: 72” (183cm) straight (not coiled)
Case material: ABS plastic
Weight: 9 oz. (255 grams) with cable
Dimensions: Length - 39.37” (100mm)
Width - 1.38” (35mm)
Height - 1.30” (33mm)
ELECTRICAL
Power Supply: 5 VDC/350mA (required for RS232 version only)
Decoded - 3 tracks -
USB (keyboard) - 40mA approx.
RS232 - 40mA approx.
Keyboard - 30mA approx.
Power consumption: TTL - 1.1 mA per track while reading
Voltage: 5 Volts DC ±10%
ENVIRONMENTAL
Warranty: 1 year
Humidity: 0% to 95% RH non-condensing
-22° to 158° F (-30° to 70° C)Storage -
Temperature: Operating - 32° to 131° F (0° to 55° C)
Magnetic head life: 1,000,000 passes, minimum
Rail and cover life: 1,000,000 passes, minimum
Read rate: Less than 1 error in 100,000 bits on cards con-
forming to ISO 7811 1-5 (not operator induced)
DECODER
Configuration: Via Reader Configuration Manager software
(downloadable from www.ute.com)
Symbologies: Codabar, Code 11, Code 32, Code 39 (Standard
and Full ASCII), Code 93, Code 128, Delta Code,
EAN-8, EAN-13, Label Code IV and V, MSI Code,
Plessey Code, Standard 2 of 5, UPC-A, UPC-E
Data Editing: Almost unlimited
To Next Page
Loading...
