-48- © 2017 unitech Electronics Co., Ltd. All rights reserved.
unitech is a registered trademark of unitech Electronics Co., Ltd.
MS650 User’s Manual
4.2.2 Terminator
Scan below bar code to set up terminator.
None
LF
CR
CR + LF
TAB
SPACE
ESC
Notes:
1. For the BT HID/ USB HID interface the default terminator is CR.
2. For the USB VCP interface the default terminator is CR+LF.
3. Below is the position of Terminator among output data string:[Preamble] [Symbology
ID] [Barcode Length] [Barcode Data] [Postamble] [Terminator]
4. By default, with Preamble, Postamble, Barcode Length and Symbology IDdisabled,
the scanner data output will be: [Barcode Data] [Terminator]