EasyManua.ls Logo

Unitech MS650 - User Manual

Unitech MS650
95 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
© 2017 unitech Electronics Co., Ltd. All rights reserved.
unitech is a registered trademark of unitech Electronics Co., Ltd.
Wireless Ring Barcode Scanner
- MS650 -
User's Manual
Version 1.0

Other manuals for Unitech MS650

Questions and Answers

  • B
    blackadamAug 10, 2025
    Why my Unitech Barcode Reader Bluetooth is unable to detect the scanner?
    • B
      Bridget SharpAug 10, 2025
      If your Bluetooth can't detect the Unitech Barcode Reader, ensure your Bluetooth version is 4.0 or later. Try restarting your Bluetooth or host device. Check that the scanner is in BT-HID mode. The scanner might be powered off, as it goes to sleep after 30 seconds of inactivity. Reactivate it by touching the scan button on both sides, or increase the power off timeout to keep it awake longer.
  • M
    Miguel RobertsAug 19, 2025
    What to do if my Unitech Barcode Reader Bluetooth can detect the scanner, but it cannot pair?
    • B
      blackkathleenAug 19, 2025
      If your Bluetooth detects the Unitech Barcode Reader but fails to pair, ensure your Bluetooth version is 4.0 or later and restart your Bluetooth or host device. Also, remove the scanner from the Bluetooth settings of any host device it was previously paired with.
  • S
    Sarah JacksonAug 30, 2025
    Why Unitech Barcode Reader does not read barcode instantly?
    • M
      markwilliamsAug 30, 2025
      If the Unitech Barcode Reader isn't reading barcodes instantly, it could be due to poor barcode print quality or weak ambient light. If the ambient light is too weak, configure the LED illumination to auto-adaptive or always on.

Summary

Chapter 1 - Overview

1.1 Package

Details the contents of the MS650 gift box, including the scanner, quick start guide, and cables.

1.3 Specifications

Lists technical specifications of the MS650, including sensor, resolution, battery life, and radio.

1.4 Getting Started

Explains how to put on and use the MS650 scanner, including aiming at barcodes.

1.5 Battery Charging

Describes the procedure for charging the MS650 scanner's battery using a USB cable.

Chapter 2 - Installation & Configuration

2.1 Interface

Explains different interface modes like BT HID, Batch Mode, and USB HID for connecting the scanner.

2.2 BT - HID

Guides on connecting the MS650 scanner via Bluetooth HID to smart devices or computers.

2.4 Batch Mode

Details how to use the MS650 scanner in Batch Mode for offline data collection and retrieval.

Chapter 3 - Symbology

3.1 Enable; Disable Symbologies

Allows users to enable or disable support for various barcode symbologies on the MS650 scanner.

3.10 Standard & Full ASCII 39, Code 32

Settings for Standard Code 39, Full ASCII Code 39, and Code 32 barcode symbologies.

3.17 GS1 DataBar, Limited, Expanded

Configuration for GS1 DataBar, Limited, and Expanded barcode symbologies.

Chapter 4 - Command Settings

4.1 General setting

Basic command settings for the MS650 scanner, including default, version, and reset options.

4.4 Accuracy Adjustment

Adjusts the scanner's accuracy level for decoding barcodes.

4.9 Keyboard Layout

Selects the keyboard layout for the scanner's output to match the host system.

Appendix A - ASCII & Function Key Tables

A-1 MIN; MAX Length setting Procedure

Details how to set minimum and maximum length parameters for barcode reading.

A-2 FULL ASCII Table (CODE 39)

Provides a comprehensive table of control codes, symbols, and alphabets for ASCII character representation.

Appendix B - Default Table

B-1 Default Table 1

Lists default settings for various scanner parameters, including interface, symbologies, and commands.

Unitech MS650 Specifications

General IconGeneral
BrandUnitech
ModelMS650
CategoryBarcode Reader
LanguageEnglish

Related product manuals