Need help?Do you have a question about the Unitech MS838 and is the answer not in the manual?
General| Type | Handheld bar code reader |
|---|---|
| Sensor type | CMOS |
| Scanner type | 2D |
| Pitch reading angle | 0 - 60 ° |
| Light levels (direct sunlight) | 0 - 100000 lx |
| Linear (1D) barcodes supported | Codabar, Code 11, Code 128, Code 39, Code 93, EAN-13, EAN-8, GS1 DataBar, GS1 DataBar Expanded, GS1 Databar Limited, GS1-128 (UCC/EAN-128), Industrial 2 of 5, Interleaved 2 of 5, Matrix 2 of 5, UPC-A, UPC-E |
| Optical sensor resolution (W x H) | 640 x 480 pixels |
| 2D (matrix & stacked) barcodes supported | Aztec Code, Data Matrix, Micro QR Code, MicroPDF417, PDF417, QR Code |
| Standard interfaces | RS-232, USB |
| Connectivity technology | Wired |
| Buzzer | Yes |
| Keys quantity | 1 keys |
| Product color | Black |
| Protection features | Crash proof, Knock resistant |
| International Protection (IP) code | IP42 |
| Power consumption | 142 mA |
| Storage temperature (T-T) | -20 - 60 °C |
| Operating temperature (T-T) | -10 - 50 °C |
| Operating relative humidity (H-H) | 5 - 95 % |
| Harmonized System (HS) code | 84716070 |
Weight and Dimensions| Depth | 95 mm |
|---|---|
| Width | 70 mm |
| Height | 160 mm |
| Weight | 245 g |
Warning statement regarding FCC rules and potential interference.
Compliance with Canadian interference regulations.
Compliance with EU RF exposure limits for public health.
Compliance with EU Radio and Telecommunications Equipment directive.
Guidelines for safe and optimal battery charging.
List of items included in the standard and combo packages.
Identification of key product components.
Technical specifications of the scanner.
Instructions for initial setup and connection.
Explanation of indicator lights and beeper sounds.
Basic settings for scanner configuration.
Configuration of data transmission interfaces.
Settings for USB keyboard emulation and character mapping.
Configuration options for the RS232 serial interface.
Settings for different scanning modes.
Settings for LED indicator light.
Settings for buzzer volume and tones.
Settings for adding prefixes and suffixes to scanned data.
Options for setting custom data prefixes.
Options for setting custom data suffixes.
Configuration for including Code ID in scanned data.
Configuration for including AIM ID in scanned data.
Selection of order for prefix and suffix data.
Setting for scanning barcodes with inverse colors.
Enable or disable all barcode types.
Configuration for Code 39 barcode symbology.
Configuration for Interleaved 2 of 5 barcode symbology.
Configuration for Industrial 2 of 5 barcode symbology.
Configuration for Matrix 2 of 5 barcode symbology.
Configuration for Code 93 barcode symbology.
Configuration for Code 11 barcode symbology.
Configuration for Code 128 barcode symbology.
Configuration for GS1-128 barcode symbology.
Configuration for UPC-A barcode symbology.
Configuration for UPC-E barcode symbology.
Configuration for EAN/JAN-8 barcode symbology.
Configuration for EAN/JAN-13 barcode symbology.
Configuration for GS1 DataBar barcode symbology.
Configuration for PDF417 barcode symbology.
Configuration for Micro PDF417 barcode symbology.
Configuration for QR Code symbology.
Configuration for QR Code URL Link symbology.
Configuration for Micro QR Code symbology.
Configuration for Data Matrix barcode symbology.
Configuration for Aztec Code barcode symbology.
Table mapping decimal and hexadecimal values to visible ASCII characters.
Table listing barcode types with their corresponding HEX and default CODE ID.
Table detailing AIM IDs and descriptions for various barcode types.
Mapping of control characters to keyboard values in USB mode.
Mapping of control characters for RS232, USB, and VCP interfaces.
Barcodes for entering numeric data and editing settings.
To Next Page
