Unitech MS838 - Chapter 3 - Symbology; Enable; Disable All Barcodes

-37- © 2021 unitech Electronics Co., Ltd. All rights reserved.
unitech is a registered trademark of unitech Electronics Co., Ltd.
MS838 User’s Manual
Chapter 3 – Symbology
3.1 Enable / Disable All barcodes
Enable all barcodes will low down decoding speed. So, we suggest you switch on
scanner when needed. (Default is switch on state)
3.1.1 Enable / Disable All 1D barcodes
Enable All
Disable All
Enable All
Disable All