Unitech MS838 - 2.1 General setting

-7- © 2021 unitech Electronics Co., Ltd. All rights reserved.
unitech is a registered trademark of unitech Electronics Co., Ltd.
MS838 User’s Manual
Chapter 2 – Command Settings
2.1 General setting
2.1.1 Enable/Disable Configuration barcode
Scanner can set up when enabled barcode function. In contrast, the
scanner can’t set up if disabled. Need to switch on and set up again.
Enable Configuration Function*
Disable Configuration Function
2.1.2 Display Version
Scan below bar code to display version.
Display Version