Need help?Do you have a question about the Unitech MS840B and is the answer not in the manual?
General| Brand | Unitech |
|---|---|
| Model | MS840B |
| Category | Barcode Reader |
| Language | English |
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC rules.
For body contact during operation, this phone has been tested and meets FCC RF exposure guidelines.
It is important to consider the environment temperature when the Lithium-Ion battery pack is charged.
Although the charged Lithium-Ion battery may be left unused for several months, their capacity may be depleted.
This scanner has capability of precise barcode scanning, reconnecting automatically after off-line in a long transmitting distance.
To charge the scanner with a cradle, follow the instructions below: Plug the adapter cable into the power socket on the bottom of cradle.
In order to establish a proper connection between your computer and a scanner through a cradle, we suggest that you follow these step-by-step instructions.
Connect the cradle to the USB, RS232, or PS2 port of your computer respectively with a USB cable, RS232 cable, or PS2 cable.
MS840 can connect directly to a Host with proper supported wireless technology. In order to establish a proper connection...
In order to establish a proper connection between your computer and a scanner through a dongle, we suggest that you follow these step-by-step instructions.
In order to establish a proper connection between your computer and a scanner through a cradle into which a dongle is inserted...
Batch Mode is the default setting. To set the scanner to the Batch Mode, scan the following barcodes in the order.
Inventory Mode is the mode in which the scanner keeps the scanned data in its memory buffer but not send out the data on the host automatically.
The scanner interface can be configured to fit the user's specific application. All configuration parameters are stored in a non-volatile memory.
The setup menu in Appendix D contains eight groups: Group 1: Device selection, Group 2: Beep and delay, etc.
The Output Data Editing feature was removed from this barcode setup manual. It is implemented to the Scanner Configuration Manager Software.
Each Formula is entered into the reader by the following sequence: Input_ID >> Length >> Match >> A-String >> O-String >>...>> O-String >> Enter
To Next Page
