To Next PageTo Next Page
Need help?Do you have a question about the Unitech MS912+ and is the answer not in the manual?
General| Connectivity | Bluetooth |
|---|---|
| Resolution | 4 mil |
| Battery Life | Up to 8 hours |
| Operating Temperature | 0°C to 50°C (32°F to 122°F) |
| Storage Temperature | -20°C to 60°C (-4°F to 140°F) |
| Lighting Indicator | LED |
| Audible Indicator | Beeper |
| Voltage | 3.7 V DC |
| Type | Pocket Barcode Scanner |
| Bluetooth Range | 10 meters |
| Interface | USB |
| Supported Barcodes | 1D |
| Supported Symbologies | Code 39, UPC, EAN, Code 128, etc. |
| Humidity | 5% to 95% (non-condensing) |
| Drop Specification | 1.5 meters |
Details regulatory compliance, including FCC, CE, RoHS, and WEEE.
Details FCC compliance for Class B digital devices and potential radio interference.
States FCC rules for device operation and interference.
Addresses FCC RF exposure guidelines for body contact operation.
Declares compliance with EU RED directive and provides download link.
Details CE RF exposure compliance with ICNIRP and EN 62209-2.
Confirms device conformance to RoHS regulations for hazardous substances.
Outlines Unitech's policy for electronic waste disposal.
Provides warnings and regulations from Taiwan's NCC.
Details laser diode compliance and safety precautions for laser components.
Provides guidelines for battery care, replacement, and disposal.
Provides essential information and cautions regarding battery charging.
Guidance on storing batteries and general safety practices.
Details applicable operation and storage temperature conditions for the product.
Important instructions for using the power adapter with the product.
Warns against listening at high volume levels for extended periods.
Provides contact information for Unitech's global support network.
Details the terms and conditions of the Unitech Limited Warranty.
Details the optic, performance, and physical characteristics of the scanner.
Guides users through initial setup, including battery charging and LED status.
Details the audible beeps and their meanings for scanner feedback.
Enables or disables the scanner's ability to change settings via barcodes.
Resets all scanner parameters to their original factory default settings.
Instructions on how to scan a configuration barcode to check firmware version.
Allows cancellation of multi-step configuration processes.
Configures audible feedback for successful barcode reads (tone and mode).
Defines data transmission, including character conversions and code output methods.
Sets the scanner to use numeric keypad input or alphanumeric input.
Configures Caps Lock behavior for the scanner's keyboard output.
Selects the keyboard layout for the scanner's output.
Sets the delay time between individual scanned characters.
Sets the delay time between scanned blocks of data.
Enables or disables the Binary Check Character for data integrity.
Allows replacement of the GS character with a user-defined character.
Adjusts imaging parameters, such as inverse barcode scanning.
Configures connection interfaces like Bluetooth HID and SPP.
Details how to connect the scanner via Bluetooth Human Interface Device profile.
Explains connection and configuration for the Bluetooth Serial Port Profile.
Allows the scanner to collect and store barcode data offline.
Configures the scanner to output data via USB HID keyboard emulation.
Configures the scanner to output data via USB Virtual COM Port.
Configures UPC-A symbology, check digit, and add-on supplements.
Configures UPC-E symbology, check digit, and add-on supplements.
Configures EAN-8 symbology, check digit, and add-on supplements.
Configures EAN-13 symbology, check digit, and add-on supplements.
Configures Code 39, including verification, start/stop, and length.
Lists default settings for various scanner functions and configurations.
