Unitech MS912+ - 2.10 Memory Mode; 2.10.1 Delete Last Record; 2.10.2 Clear All Record

30
© 2022 Unitech Electronics Co., Ltd. All rights reserved.
Unitech is a registered trademark of Unitech Electronics Co., Ltd.
All product and company names are trademarks, service marks, or registered trademarks of their respective owners
EA520 User’s Manual
MS912+ 2D User’s Manual
2.10 Memory Mode
Memory Mode
After scanning the above barcode, the scanner will be able to collect barcode
data off-line. The barcode data will be stored in the format of:
<Date>, <Time>, <Barcode Data> <CR>
To retrieve stored data, please connect the scanner to the host with USB cable,
access removable storage device “MiniScan” from which you may open or
copy the file “BARCODE.txt” to your computer.
To exit Memory Mode, simply scan any interface barcode (e.g. “BT HID”, “BT
SPP”, “USB HID”, “USB VCP”) other than memory mode.
2.10.1 Delete Last Record
To delete last memory data, please scan below configuration barcode.
Delete Last Data
2.10.2 Clear All Record
To delete all memory data, please connect the scanner to the host with USB
cable, access removable storage device “MiniScan”, and delete the file
“BARCODE.txt”. The scanner will emit two beeps as indication that the file has
been successfully deleted.