Unitech MS912+ - 2.13 Trigger Mode; 2.14 Toggle Mode; 2.15 Continuous Mode

37
© 2022 Unitech Electronics Co., Ltd. All rights reserved.
Unitech is a registered trademark of Unitech Electronics Co., Ltd.
All product and company names are trademarks, service marks, or registered trademarks of their respective owners
EA520 User’s Manual
MS912+ 2D User’s Manual
2.13 Trigger Mode
In Trigger Mode the LED will stay on once trigger is pressed and held, and will
turn off automatically once a barcode is read or LED Auto-Off timeout expires.
Trigger Mode*
2.14 Toggle Mode
In Toggle Mode the LED will stay on once trigger is pressed once, and will turn
off automatically when a barcode is read or LED Auto-Off timeout expires.
Toggle Mode
2.15 Continuous Mode
In Continuous Mode the LED will stay on, reading barcodes continuously, and
will turn off when:
a barcode is read (2) LED Auto-Off timeout expires (3) trigger is pressed
(Trigger Control enabled)
Continuous Mode