Unitech MS912+ - 2.10.3 Data Format; 2.10.4 Field Separator

31
© 2022 Unitech Electronics Co., Ltd. All rights reserved.
Unitech is a registered trademark of Unitech Electronics Co., Ltd.
All product and company names are trademarks, service marks, or registered trademarks of their respective owners
EA520 User’s Manual
MS912+ 2D User’s Manual
2.10.3 Data Format
The default Data Format in memory mode is <Date>, <Time>, <Barcode
Data>.
Data Format
Below are configurable items and their setup codes:
Code
Item
2
Date
3
Time
4
Barcode Data
5
Quantity
Example: Set Data Format as <Barcode Data>, <Time>, <Date>
Step1: Scan “Data Format”
Step2: Scan “4” “3” “2” respectively in Appendix – Numbers
Step3: Scan “Data Format”
2.10.4 Field Separator
The field separator in memory mode is comma ( , ) by default. It can be
replaced by any alphanumeric characters.
Field Separator
Example: Set Field Separator as Semicolon ( ; )
Step1: Scan “Field Separator”
Step2: Scan “ ; ” in Appendix – Symbols
Step3: Scan “Field Separator”