Unitech MS912+ - 2.17.2 Scan Interval

39
© 2022 Unitech Electronics Co., Ltd. All rights reserved.
Unitech is a registered trademark of Unitech Electronics Co., Ltd.
All product and company names are trademarks, service marks, or registered trademarks of their respective owners
EA520 User’s Manual
MS912+ 2D User’s Manual
2.17.2 Scan Interval
Scan Interval (applicable for Continuous Mode) is the period of time between
two consecutive scans. The configurable range is from 0.1 to 25.5 sec.
Scan Interval
(Default = 1 sec)
Example: Set Scan Interval to 10 sec
Step1: Scan Scan Interval
Step2: Scan “2” “4” in Appendix – Numbers
(01 = 0.1 sec, 02 = 0.2 sec, 03 = 0.3 sec, 04 = 0.4 sec, 05 = 0.5 sec, 06
= 1.0 sec, 07 = 1.5 sec, 08 = 2.0 sec, 09 = 2.5 sec, 10 = 3.0 sec, 11 = 3.5
sec, ...55 = 25.5 sec
Default = 06 (1 sec))
Step3: Scan Scan Interval