40
© 2022 Unitech Electronics Co., Ltd. All rights reserved.
Unitech is a registered trademark of Unitech Electronics Co., Ltd.
All product and company names are trademarks, service marks, or registered trademarks of their respective owners
2.17.3 Identical Read Interval
Identical Read Interval (applicable for Continuous Mode, Auto-sensing Mode)
defines the period of time between two consecutive scans on a barcode or two
identical ones. This prevents repetitive input of an identical data. The
configurable range is from 0.1 to 25.5 sec.
Identical Read Interval
(Default = 1 sec)
Example: Set Identical Read Interval to 10 sec
Step1: Scan Identical Read Interval
Step2: Scan “2” “4” in Appendix – Numbers
(01 = 0.1 sec, 02 = 0.2 sec, 03 = 0.3 sec, 04 = 0.4 sec, 05 = 0.5 sec, 06
= 1.0 sec,
07 = 1.5 sec, 08 = 2.0 sec, 09 = 2.5 sec, 10 = 3.0 sec, 11 = 3.5 sec, ...55
= 25.5 sec
Default = 06 (1 sec))
Step3: Scan Identical Read Interval
2.17.4 Trigger Control
Trigger Control (applicable for Continuous Mode, Auto-sensing Mode) allows
LED to be turned on/off by pressing trigger.
Enable Trigger Control*
Disable Trigger Control
To Next Page
Loading...
Need help?
General
