Need help?Do you have a question about the Unitech MS250 and is the answer not in the manual?
General| Type | Handheld bar code reader |
|---|---|
| Sensor type | CCD |
| Scanner type | 1D |
| Linear (1D) barcodes supported | Codabar, Code 11, Code 128, Code 32, Code 39, Code 93, EAN 128, EAN-13, EAN-8, GS1 DataBar, ISBN, Interleaved 2 of 5, MSI, Plessey, UPC-A, UPC-E |
| 2D (matrix & stacked) barcodes supported | Not supported |
| Standard interfaces | RS-232, USB |
| Connectivity technology | Wired |
| Power source type | DC |
| AC adapter output voltage | 5 V |
| Buzzer | Yes |
| Certification | CE, FCC, BSMI, VCCI |
| Product color | Black |
| Storage temperature (T-T) | -20 - 70 °C |
| Operating temperature (T-T) | 0 - 50 °C |
| Operating relative humidity (H-H) | 20 - 95 % |
Weight and Dimensions| Depth | 62.5 mm |
|---|---|
| Width | 79 mm |
| Height | 163.3 mm |
| Weight | 83 g |
Provides instructions for connecting the scanner to a host PC and performing a barcode scan.
Covers options for selecting the scanner's communication interface type, such as USB or RS232.
Defines settings for different scanning modes, including trigger behavior and testing.
Configuration settings for RS232 serial communication, including baud rate and data bits.
Settings for emulating keyboard wedge interfaces and terminal types.
Controls output terminators, character delays, and character transformations.
Configuration options for wand emulation mode, including TTL level and scan speed.
Enables or disables support for various barcode symbologies like UPC, Code 39, and Code 128.
Settings for UPC, EAN, and JAN barcode types, including reading type and check digit transmission.
Configuration options specific to the Code 39 barcode symbology, including type and check digit.
Settings for the Code 128 barcode symbology, covering reading types and check digit transmission.
To Next Page
