Need help?Do you have a question about the Unitech MS338 and is the answer not in the manual?
General| Scanning Technology | Laser |
|---|---|
| Operating Temperature | 0°C to 50°C (32°F to 122°F) |
| Storage Temperature | -20°C to 60°C (-4°F to 140°F) |
| Humidity | 5% to 95% (non-condensing) |
| Voltage | 5VDC ± 5% |
| Type | Handheld |
| Connectivity/Interface | USB, RS-232, Keyboard wedge |
| Scan Rate/Speed | 100 scans/sec |
| Supported Barcodes | UPC/EAN, Code 39, Code 128, Interleaved 2 of 5, Codabar |
| Resolution | 4 mil |
| Drop Specification | 1.5 m |
| Power Consumption | 1.5 W |
Detailed technical specifications of the Unitec MS338 barcode scanner.
Default configuration parameters for various barcode symbologies.
Physical dimensions and measurements of the barcode scanner.
Identification of the main components and features of the scanner.
Pin configuration details for RS232 and USB interface cables.
Procedures for connecting and disconnecting scanner cables.
Instructions for assembling the optional scanner stand.
How to enable or disable the scanner's auto-detection feature.
Methods for configuring single scanner parameters using 1D barcodes.
How to set multiple scanner parameters by scanning a single QR code.
Options for selecting between RS-232 and USB interfaces.
Detailed settings and options for the RS-232 serial interface.
Various USB connection modes and their configurations.
Configuring scanner behavior, scan modes, and general settings.
Understanding LED and beeper signals for scanner status.
Settings for scanner illumination and aiming during barcode decoding.
How to read multiple or structured append barcode symbols.
Specific settings for the UPC-A barcode symbology.
Specific settings for the UPC-E barcode symbology.
Specific settings for the UPC-E1 barcode symbology.
Settings for EAN-13, ISBN, and ISSN barcode symbologies.
Specific settings for the EAN-8 barcode symbology.
Settings for Code 39, Code 32, and Trioptic Code 39 symbologies.
Specific settings for the Interleaved 2 of 5 barcode symbology.
Settings for Industrial 2 of 5 and Discrete 2 of 5 symbologies.
Specific settings for the Matrix 2 of 5 barcode symbology.
Specific settings for the Codabar barcode symbology.
Specific settings for the Code 128 barcode symbology.
Specific settings for the UCC/EAN 128 barcode symbology.
Specific settings for the ISBT 128 barcode symbology.
Specific settings for the Code 93 barcode symbology.
Specific settings for the Code 11 barcode symbology.
Specific settings for the MSI/Plessey barcode symbology.
Specific settings for the UK/Plessey barcode symbology.
Specific settings for the China Post barcode symbology.
Specific settings for the China Finance barcode symbology.
Specific settings for the Telepen barcode symbology.
Settings for GS1 DataBar and GS1 DataBar Truncated symbologies.
Specific settings for the GS1 DataBar Limited barcode symbology.
Specific settings for the GS1 DataBar Expanded barcode symbology.
Specific settings for the PDF417 barcode symbology.
Specific settings for the QR Code barcode symbology.
Specific settings for the Data Matrix barcode symbology.
Settings for substituting strings and replacing characters in data.
Configuring string insertion positions and code ID placement.
Options for transmitting prefix, suffix, code name, and other string data.
Instructions for cleaning the scanner's exit window.
Creating barcodes for non-printable characters and function keys.
Reference table for ASCII codes used in keyboard wedge and RS-232.
Scannable barcodes for rapid enabling/disabling of Auto-detection.
Procedures for resetting to defaults and viewing firmware version.
Barcodes used for entering alphanumeric data during configuration.
To Next Page
