Unitech MS250 - Buzzer Beep Tone; Sensitivity of Continuous Reading Mode

Copyright 2012 unitech Electronics Co., Ltd. All rights reserved. Unitech is a registered trademark of unitech Electronics Co., Ltd.
49
3 Times
4 Times
7.5 Buzzer Beep Tone
<High>
Medium
Low
Off
7.6 Sensitivity of Continuous Reading Mode
A Quick Setting:
<Fast>
Slow
B Same Code Delay Reading Interval
Following code sequences represent the length of time before a barcode can be
rescanned at continuous and flash reading mode. The value can be defined from
1-50 and they represent 100ms to 5 seconds in 100ms interval. Default value is 3 (0.3
seconds).