Unitech MS650

-35- © 2017 unitech Electronics Co., Ltd. All rights reserved.
unitech is a registered trademark of unitech Electronics Co., Ltd.
MS650 User’s Manual
3.12 UPC-E System Number
UPC-E0 UPC-E1 UPC-E EXPAND
E (0) OFF E (1) ON Enable
E (0) ON E (1) OFF
Disable
Note:
Most UPC bar codes lead with 0
number systems, for these
barcodes use UPC E(0) selection.
For the bar codes that lead with the
1 number, use UPC E(1) selection.
Notes:
1. If UPC-E EXPAND TO UPC
A FORMAT is enabled, the
output of UPC-A will be 12
digits.
2. The default output of UPC-A
is 12 digits, if UPC-A
EXPAND TO EAN13 is
enabled, a zero will be added
to in front of the bar code.