-25- © 2019 unitech Electronics Co., Ltd. All rights reserved.
unitech is a registered trademark of unitech Electronics Co., Ltd.
MS851 User’s Manual
• Supplemental User-Programmable Type 1 - applies to EAN-13
bar codes starting with a 3-digit user-defined prefix. Set this
3-digit prefix using User-Programmable Supplementals.
• Supplemental User-Programmable Type 1 and 2 - applies to
EAN-13 bar codes starting with either of two 3-digit user-defined
prefixes. Set the 3-digit prefixes using User-Programmable
Supplementals.
• Smart Supplemental Plus User-Programmable 1 - applies to
EAN-13 bar codes starting with any prefix listed previously or the
user-defined prefix set using User-Programmable Supplementals.
• Smart Supplemental Plus User-Programmable 1 and 2 -
applies to EAN-13 bar codes starting with any prefix listed
previously or one of the two user-defined prefixes set using
User-Programmable Supplementals.
NOTE
To minimize the risk of invalid data transmission, select either to decode or
ignore supplemental characters.