Unitech MS851

-64- © 2019 unitech Electronics Co., Ltd. All rights reserved.
unitech is a registered trademark of unitech Electronics Co., Ltd.
MS851 User’s Manual
3.10.3 MSI Check Digits
These check digits at the end of the bar code verify the integrity of the data. At
least one check digit is always required. Check digits are not automatically
transmitted with the data.
If two check digits are selected, also select an MSI Check Digit Algorithm.
3.10.4 Transmit MSI Check Digit
Scan this symbol to transmit the check digit with the data.
Scan this symbol to transmit data without the check digit.