Need help?Do you have a question about the Unitech TS100 and is the answer not in the manual?
Outlines compliance with FCC, CE, RoHS, and other regulatory standards.
Warning statement specific to Taiwan's National Communications Commission regulations.
Guidelines for proper battery usage, charging, and maintenance.
Safety warning about potential hearing damage from prolonged exposure to sound.
Explains the terms and conditions of the Unitech limited warranty.
Lists the technical specifications of the TS100 scanner, including optical, communication, and mechanical properties.
Guides users on connecting the TS100 scanner to a host PC and initial setup.
Instructions on how to program the TS100 scanner using barcodes for configuration.
Explains how to set up the scanner for USB Human Interface Device (HID) Keyboard emulation.
How to enable USB COM Port Emulation for serial communication.
Details different scanning modes like Trigger Mode, Presentation Mode, and Read Mode.
Settings for enabling/disabling and configuring Code 128 barcode symbology.
Options for EAN-8 barcode configuration, including check digit and add-on codes.
Configuration options for EAN-13 barcodes, including check digit and add-on codes.
Settings for UPC-E barcode configuration, including check digit and expansion options.
Configuration for UPC-A barcodes, including check digit and addenda settings.
Settings for Interleaved 2 of 5 barcode, including length range and check digit.
Configuration for Matrix 2 of 5 barcode, including length range and check digit.
Settings for Industrial 2 of 5 barcode, including length range and check digit.
To Next Page
General
